Top Quality Parallel Scroll Refrigeration Compressor Unit Supply to Cologne

Short Description:

Features of Scroll Rack Refrigeration Compressor Main features of Scroll: it has higher energy efficiency ratio, the Scroll one belongs to rotation compressor which also exists some remained space that is far lower than reciprocate one; The Scroll one is adopts double flexible design for keeping seal between scroll plate and allowing Scroll plate divided in radial direction and axial direction, it owns longer life and higher reliability, better liquid acceptance level and impurity acceptance ...


Product Detail

Product Tags

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Top Quality Parallel Scroll Refrigeration Compressor Unit Supply to Cologne, Contact with us today! We are ready for the market service now!


Features of Scroll Rack Refrigeration Compressor

Main features of Scroll: it has higher energy efficiency ratio, the Scroll one belongs to rotation compressor which also exists some remained space that is far lower than reciprocate one;
The Scroll one is adopts double flexible design for keeping seal between scroll plate and allowing Scroll plate divided in radial direction and axial direction, it owns longer life and higher reliability, better liquid acceptance level and impurity acceptance level;
The Scroll one is always arranged in symmetry, which results in lower unbalance stress, lower noise and vibration level ,smooth voice spectrum and gentle voice quality;

ZF series Scroll Rack with enhanced vapor injection (EVI): show the outstanding character under low-temperature working condition; the low-temperature reliability turns stronger; energy efficiency ratio becomes higher; resolved the problem as frequent heat protection of system on account of air suction overheating and broken of Scroll plate due to Discharge over-temperature.

Features of Scroll Rack Refrigeration Compressor

Main features of Scroll: it has higher energy efficiency ratio, the Scroll one belongs to rotation compressor which also exists some remained space that is far lower than reciprocate one;
The Scroll one is adopts double flexible design for keeping seal between scroll plate and allowing Scroll plate divided in radial direction and axial direction, it owns longer life and higher reliability, better liquid acceptance level and impurity acceptance level;
The Scroll one is always arranged in symmetry, which results in lower unbalance stress, lower noise and vibration level ,smooth voice spectrum and gentle voice quality;

ZF series Scroll Rack with enhanced vapor injection (EVI): show the outstanding character under low-temperature working condition; the low-temperature reliability turns stronger; energy efficiency ratio becomes higher; resolved the problem as frequent heat protection of system on account of air suction overheating and broken of Scroll plate due to Discharge over-temperature.

Features of Scroll Rack Refrigeration Compressor

Main features of Scroll: it has higher energy efficiency ratio, the Scroll one belongs to rotation compressor which also exists some remained space that is far lower than reciprocate one;
The Scroll one is adopts double flexible design for keeping seal between scroll plate and allowing Scroll plate divided in radial direction and axial direction, it owns longer life and higher reliability, better liquid acceptance level and impurity acceptance level;
The Scroll one is always arranged in symmetry, which results in lower unbalance stress, lower noise and vibration level ,smooth voice spectrum and gentle voice quality;

ZF series Scroll Rack with enhanced vapor injection (EVI): show the outstanding character under low-temperature working condition; the low-temperature reliability turns stronger; energy efficiency ratio becomes higher; resolved the problem as frequent heat protection of system on account of air suction overheating and broken of Scroll plate due to Discharge over-temperature.

Reciprocating Rack with many evap.temperature is equipped with evap.pressure regulation valve, which can meet different requirement for evap.temperature; all evap.temperature are integrated into one frame and saved the installation space at field; It can combine heat recycling system into Rack, little part of recycled heat may also be used in water for daily use, which made full use of energy;
Unique liquid and gas separation bonded with multi-branch integrated gas return totally ensured smoothness of oil returning;
Combination of multiple compressor makes energy regulation of unit smoother and vibration lower.

  • Previous:
  • Next:



  • http://www.magnalight.com/p-48767-ul-listed-70-watt-led-blasting-light-7-10-watt-cree-leds-6020-lumen-ip68-pwm-circuitry-.aspx

    Buy American Compliant

    The BL70-LED blasting light is ideal for use in sand and media blasting applications where a powerful light capable withstanding the harsh conditions of the blasting are is needed. Producing 6,020 lumens of light output, this light has a 50,000 hour rated service life and the capability of operating with common 120-277 volt AC using the included inline transformer or 9-46 VDC without it.

    The BL70-LED blasting light from Magnalight produces 6,020 lumens of bright light while drawing only 70 watts @6 amps from a 12 volt electrical system. Seven CREE XLamp MC-E® ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a flood beam 300 feet long by 200 feet wide. We also offer a 20 degree spread spot beam configuration to produce a beam approximately 750′ long by 100′ in width. These LED light blasting lights are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. A single 200 pound grip magnetic base enables the operator to use the light as portable base stand unit on the floor, or they can use this LED blasting light as a magnetic mount back light.

    This LED blasting light normally runs on any voltage ranging from 9 Volts to 46 Volts DC, but with the inlcuded DCP-11-DP inline transformer and 50 feet of SOOW cord, can also run from common 120V/277V AC. Operators can run these lights directly from a battery, generator vehicle, or by using the included DCP-11-DP transformer, plug this unit into any available wall outlet, 220V, or 277VAC power source.

    Optional LED colors include Amber and Green for more effective light penetration in the dusty environment of a media blasting room. An integral Pulse Width Modulation controller, small profile, versatile power options, high durability and versatile mounting magnetic system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: sand/media blasting, military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination.

    PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range.

    When equipped with the inline transformer, the LEDP10W series of light bars can operate on current ranging from 9 to 46 VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.

    Durability: As well as unparalleled heat control, the LEDP10W series of LED light bars from Magnalight also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.

    Mounting: This LED blasting light has a single 200 lbs grip magnetic base that can hold the unit in place even under high vibratory conditions. An integrated trunnion bracket allows operators to adjust the light through a full range of vertical movement, providing the ability to aim the light regardless of where it is mounted for best light coverage.

    #larsonlights



    This is an set-up and instruction video for our RDH series of dehumidifiers but it is also useful for our WDH model (single display) as well.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car