Ordinary Discount Direct Air Handling Unit to Swiss Importers

Short Description:

Direct Air Handling Unit ZAHU series packaged AC unit is such a kind of device used for handling of air temperature,air humidity in marine AC system,it has 18 essential types and consists of the following sections: mixed section,filter section,heating coil section,humidification section,fan section,silencer section and so on, owning the characters as newly design,convenient operation,steady running,safety and reliability,convenient maintenance etc. It is also adopted in all kinds of passenger...


Product Detail

Product Tags

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Ordinary Discount Direct Air Handling Unit to Swiss Importers, We have confident that we can provide the high quality products at resonable price, good after-sales service to the customers. And we will create a bright future.


Direct Air Handling Unit

ZAHU series packaged AC unit is such a kind of device used for handling of air temperature,air humidity in marine AC system,it has 18 essential types and consists of the following sections: mixed section,filter section,heating coil section,humidification section,fan section,silencer section and so on, owning the characters as newly design,convenient operation,steady running,safety and reliability,convenient maintenance etc. It is also adopted in all kinds of passenger ship,cargo ship,nasal vessel and marine oil platform and so on.

1) Structural Features
. Modulization design
     Components has universal use and can be exchanged conveniently
. Double-layer galvanized plate structure,polyurethane foam temperature
 protection
. 50mm foam plate owns low weight,good rigidity and low heat
 conductivity coefficient
. New sealed materials contribute to minimize leakage air volume
. Coil drain valve
  The lowest part of coil is equipped with drain valve used for draining water Inside tube, providing that frost crack happen in tube.
. Unit base
  The base is applying stitching base,thus it owns charming outline,which also guaranteed strength of the unit.
2) Performance characters
.
 It applies newly designed backward double-air-inlet centrifugal fan, owning the features of low noise,high efficiency. Fan impeller,belt will be adjusted by static and dynamic balance,while the whole fan will be regulated by running vibration again to reach steady condition.  
Fan motor is fitted with vibration damper in common base,air outlet will be connected
 to box by flexible tube and insulated from running components totally, which resulting in low vibration.
. Coil adopts second-used corrugated fin and connected to copper tube by mechanical tube expanding method,which bring forth to good heating transferring efficiency.

Coil collector is equipped with vent valve and water drain valve,guaranteed that there will be no accumulated air in circulation,meanwhile,water in coil can be drained totally in winter for avoiding frost crack.
Water defector will be equipped in the back of coil,when face velocity is higher
 than 2.5m/s.
. Primary filter is plate type,whose efficiency presents as G3~G4 grade.
Middle efficient filter is bag type with efficiency of F5~F8 grade.
3) Simple maintenance
   . Unit is equipped with inspection door with special design,which result in easily opening for inspection maintenance.
4) Intelligent control
.
 ZAHU packaged AC series can added the following function (purchased additionally) according to customer’s requirement
1. Accurate temperature and humidity can be reached through installation of all kinds of sensors and PLC controlling of electric air door actuator,electrical valve and so on.
2. By way of installing frequency converter device, the air flow change running can
 be fully achieved, finally reaching energy conservation effect.
 
Unit model and dimension calculation formula
(1)
   Width=width modulus x 100 +50
(2)
   Height=height modulus x 100 +50
      Example:ZAHU1209
              12  width modulus  width:12 X 100 + 50 = 1250mm
              09  height modulus   height:9 X 100 + 50 = 950mm
Note:Unit height is except for base in 150mm and dimension of top air inlet

Direct Air Handling Unit
ZAHU Marine Direct AC Unit Dimension Diagram

  • Previous:
  • Next:



  • Send your inquiry for Waste plastic recycling machine to: sales@polystarco.com
    Find more info about Waste plastic recycling machine on: http://www.polystarco.com/en/products_sub_F01.htmlWaste plastic

    Polystar (Taiwan) — Original manufacturer of Waste plastic recycling machine
    recycling machine — model HNT-120V

    Polystar is a professional manufacturer of Waste plastic recycling machine in Taiwan, we design and manufacture Waste plastic recycling machine based on every customer’s requirement. Polystar Taiwan produces a wide range of Waste plastic recycling machine, including Waste plastic recycling machine, air-cooing recycling machine, water-cooling recycling machine, die-face-cutting recycling machine, water-ring-cutting recycling machine, noodle type cutting recycling machine, two-stage recycling machine…etc.

    Polystar’s high efficiency, one-step Waste plastic recycling machine HNT-V is designed for the reprocessing of PE polyethylene(HDPE, LDPE, LLDPE) and PP polypropylene flexible packaging material, printed and non-printed. This cutter integrated pelletizing system of Waste plastic recycling machine eliminates the need of pre-cutting the material, requires less space and energy consumption while producing high quality plastic pellets at a productive rate.

    Polystar manufacturers a variety of Waste plastic recycling machine with higher and lower capacity of 80~1000 kg/hr. This model HNT-120V has capacity of 300~500 kg/hr.

    The main features of this Model HNT-120V Waste plastic recycling machine are its cutter compactor system which is integrated with shredder/cutter and its water ring die-face-cutting system. The high efficient Waste plastic recycling machine adopts cutter compactor system. That means to combine shredder/cutter in shredding unit which eliminates the need to pre-cut material. The plastic waste will be cut before being fed into the extrusion unit. The water ring die-face-cutting system of Waste plastic recycling machine is an upgrade of noodle type cutting system. It provides a stable cutting of material and produces beautiful pellets with even shape.

    Model HNT-V Waste plastic recycling machine specializes in recycling HDPE/LDPE and PP waste. The Waste plastic recycling machine is especially a suitable machine for blown film factory to recycle their own in-house waste because the post-industrial waste from blown film factory is usually clean and uncontaminated, which is suitable to be recycled on this Waste plastic recycling machine. In addition to in-house (post-industrial) film waste, Waste plastic recycling machine is also able to process washed flakes, scraps and regrind (pre-crushed rigid plastic waste from injection and extrusion). This Waste plastic recycling machine is highly recommended for packaging film producers of commercial bags, garbage bags, agricultural films, food packaging, shrink and stretch films, as well as producers in the woven industry of PP woven bags, jumbo bags, tapes and yarns. Other types of material such as PS sheet, PE and PS foam, PE net, EVA, PP mixed with PU are also applicable on this Waste plastic recycling machine.

    Applicable material for Waste plastic recycling machine:
    HDPE/LDPE film
    HDPE/LDPE edge trim waste
    PP waste bag
    T-shirt bag cut off
    PP raffia
    PP woven sack
    Crushed sheet
    Plastic flakes

    Waste plastic recycling machine produces high quality reusable pellets. The produced pellets from Waste plastic recycling machine can be put directly back to the production line, mostly blown film or pipe extrusion processes.

    Polystar has sold Waste plastic recycling machine to Egypt, Russia, Ecuador, Chile, Australia, Malaysia, Japan and many other countries around the world for over 25 years.

    Send your inquiry for Waste plastic recycling machine to: sales@polystarco.com
    Find more info about Waste plastic recycling machine on: http://www.polystarco.com/en/products_sub_F01.html

    Waste plastic recycling machine — model HNT-120V
    Polystar (Taiwan) — Original manufacturer of Waste plastic recycling machine

    http://www.polystarco.com



    This is our triple pass radiator for the Polaris RZR 900. We designed this for those extreme situations where your needing extra cooling, Our radiator is the thickest on the market, coupled with our triple pass cooling and a Spal fan producing 1710 CFM which is 610 CFM over the factory fan. You will have a cooling system to keep you running cool in the most extreme conditions. We also build this in our mudder version (lower fin count), designed to stay cleaner and clean out easier, for those who like to play in the mud. To solve your Polaris RZR 900 overheating problems check us out at https://www.tcpperformance.com/store#!/2011-2014-RZR-900-Triple-Pass-Heavy-Duty-Radiator-&-Fan-Kit/p/68656536/category=20239258 or give us a call at (208) 356-6483.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree