OEM Customized wholesale Parallel Piston Refrigeration Compressor Unit to Macedonia Manufacturer
Zeniya Refrigeration&Air conditioning equipment CO.,Ltd,established in 2005, is concerned on developing high-quality, newly-designed refrigeration and air conditioning equipment. Over this years, we have developed all types of Rack as bellow: Small Rack applies Copeland middle&low temperature flexible Scroll compressor; Middle Rack applies Bitzer, Kobe Steel semi-hermetic screw compressor; Large Rack applies Bitzer, Kobe Steel semi-hermetic screw compressor; Adopt all kinds of late...
The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for OEM Customized wholesale Parallel Piston Refrigeration Compressor Unit to Macedonia Manufacturer, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Zeniya Refrigeration&Air conditioning equipment CO.,Ltd,established in 2005, is concerned on developing high-quality, newly-designed refrigeration and air conditioning equipment. Over this years, we have developed all types of Rack as bellow:
Small Rack applies Copeland middle&low temperature flexible Scroll compressor;
Middle Rack applies Bitzer, Kobe Steel semi-hermetic screw compressor;
Large Rack applies Bitzer, Kobe Steel semi-hermetic screw compressor;
Adopt all kinds of latest energy conservation technology, low-temperature enhanced vapor injection technology, hot gas defrosting technology, stepless regulation and Frequency conversion technology and heat recycling technology.
There are ball valves installed in components of Rack, which brings convenience to inspection of the unit. Some components can be inspected during the running of unit, reducing the probability of broken on equipment, thus give forth to more value for our customers;
All liquid branch tube of Rack are installed on unit intensively and orderly contributes to the convenience for operation and maintenance;
High-efficient energy conservation :
Under the same cooling capacity ,motor power of single unit is higher than common one, therefore, the max.starting current will be 6-7 times higher than rated current, never the less, it put more pressure on capacity of compressor and result in more cost in power distribution investment.
Rack is equipped with multi-head paralleled +unload energy regulation, the optimal energy regulation can be reached according to storage amount of refrigeration room and freezer room, letting evap.pressure reach balance gradually, then the matching of load will be achieved and energy conservation will be got;
Rack is equipped with energy regulation,which not only improved the quality but also reached the perfect cooling efficiency consumption has been reduced as much as possible, giving forth to low cost totally. To sum up, Rack will be more energy-conserved than single unit of 30-50%.
Racks can be matched up with compressor regardless of their dimensions for providing more regulation step number, cooling capacity output will be matched up with actual heat load more smoothly and dynamically;
Rack owns controlling of multi air suction branch tube, one unit can provide different evap. Temperature configuration, which may offer high-efficient cooling source for refrigerator , freezer, ship refrigeration in supermarket;
Rack is controlled by microcomputer, being match up with actual dynamic load and reducing vibration of evap.pressure obviously.
Cleveland home inspector explains the reason you have mold (mould) growing on your basement joists, basement sheathing, and other basement timbers. This surface “black mold” and other colored moulds are very common in old houses and new homes. Forest trees are cut down and the logs are sent to the “saw mill” to be cut. This wood is sawn into joists, rafters, studs, and beams. This wood is also sent wood processing plants to be fabricated into plywood, OSB, press wood, laminated wood, engineered wood, micro lambs, and TGI’s. These finished timber products are then delivered to the lumber yard and stores like “Forest City” “Home depot” Lowes, Menards, and others. Regardless, whether the storage facility is interior or exterior, these storage areas generally have some moisture and some humidity. Additionally, the wood is still fresh due to it being recently cut and may still during out. Mold spores are everywhere and they will grow on any cellulose product if permitted. These freshly cut stored timbers which may still be drying out are made of cellulose. Mold spores attach and begin to grow. This fresh wood is then purchased and installed in new homes and new additions. During construction, the basements are wet, moist, humid, and dark. These are perfect environments for fungal amplification or mold growth. After the new windows, roof, doors, and siding installations are complete, the interior house moisture becomes trapped. This trapped moisture becomes much larger after the drywall, joint compound, and painting work have been completed. Additionally moist air is lighter than dry air and it rises just like when water evaporates from wet grass to form rain storm clouds. The upper basement joist areas are cool, dark, moist, and enriched with mold spores and the mold continues to grow on the surface of the wood. Sometimes, the mold is black, white, yellows or even fuzzy. Testing the mold is generally a waste of money. If you see mold, smell mold, its mold.
After the home dries out, and the homes humidity level is lowered, this surface mold no longer grows or amplifies. This surface mold can be easily washed, cleaned, and sanitized.
When you build a new home or a new addition, it is very important to run the AC and to run the dehumidifier so you can dry the new home quicker.
If you have an older home, you need to identity the moisture source or the moisture generator and remove it. Sometimes it is as simple as conditioning a crawl space which would includes a 100% sealed vapor barrier, printer insulation, heating and dehumanizing, , sealing the sump pump with a 100% sealed lid, removing ventless appliances, or running a basement dehumidifier.
Thank you this has been “Home Inspector” Marko Vovk (Wrong spelling sometimes used “Marco, Volk”",Marco Vouk” or “Marko Voke”) from http://houseinvestigations.com/
Please subscribe to my Youtube channel.
Marko Vovk home inspector can be reached at http://houseinvestigations.com/
Marko Vovk home inspector can be emailed at Clevelandmold@aol.com
Please watch more Youtube videos at http://houseinvestigations.com/markotv/
Cleveland Home Inspectors at
Contact Marco Volk (Marko and Vovk is the correct spelling) at http://houseinvestigations.com/contact-us/
Thank you for watching.
PS: If any big, shot needs a funny smart actor and future “movie star”, please call me. I want my own cable show someday a have 1mil photos and movies and make a video an any house condition or anomaly. REALLY.
See the video call “Mold the Truth We have all been scammed”