High reputation for Screw Type Compressor Condensing Unit to Libya Importers
ZMCU Marine Compressed Condensing Unit Marine compressed condensing units are to provide refrigerant liquid for air conditioning system direct end device. The units have the features of new-design, easy-operation, stable-working, safety and convenient-maintaining etc. They widely used for all kinds of passenger ship, cargo ship, oil platform etc. Outline of unit It is mainly composed of compressor, condenser and control box etc. The cooling compressor is word famous brand. Key controlling par...
We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for High reputation for Screw Type Compressor Condensing Unit to Libya Importers, We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
ZMCU Marine Compressed Condensing Unit
Marine compressed condensing units are to provide refrigerant liquid for air conditioning system direct end device. The units have the features of new-design, easy-operation, stable-working, safety and convenient-maintaining etc. They widely used for all kinds of passenger ship, cargo ship, oil platform etc.
Outline of unit
It is mainly composed of compressor, condenser and control box etc.
The cooling compressor is word famous brand.
Key controlling parts are imported name brand.
Condenser applies aluminum cooper tube、B10/B30 cooper nickel tube with high corrosion resistance and special structure, it can prevent ship from swing due to flow-stop.
Pressure test, vacuum test and running test have been done before leaving factory.
Match proper direct end device to form a full system.
Its design and manufacture are according to standard requirements of ship class.
Product in special specification can be customized.
De Van Dijke Hydro Cooler is ontwikkeld om uw agrarische producten vanuit de verwerking terug te koelen voor b.v. transport. De Hydro-unit is uniek vanwege zijn water-recycling systeem en de afvoer van eventueel bezonken slib/zand. De getoonde machine is volledig vervaardigd uit RVS 304 en draait in de wortelen.
http://brs.li/minireactor There are few main differences between the mini 5″ and the larger 10” reactor. First, the mini is designed to either run carbon alone or a mix of GFO and carbon. While it might be possible, we don’t suggest running GFO alone because the reactor is a bit too short to get it to tumble properly.
While the larger reactor can be used with different volumes of GFO and carbon by sliding the foam disk up and down, with the mini we suggest packing the small cartridge full which will prevent issues from the carbon and/or GFO tumbling and creating unnecessary fines.
This means you can add around 3/4’s cup carbon to the reactor or a mix of one half cup carbon and a quarter cup of GFO. You will need a tool like a screw driver to pop the top off, add your media, replace the foam top and both plastic lids and you are ready to go.
There are two ways to go about installing this small reactor which is probably heavily dependent on your spatial constraints. First one is to cut all the tubing very short so the pump basically hangs right off the intake and then place the valve right on the output.
This produces a small, compact reactor which can just be set down anywhere in the sump. When it comes time to replace the media you can just close the valve and flip the pump up to stop water from spilling. Then, take the whole thing to the sink (which is probably the cleanest and easiest way I have ever changed media in any reactor.)
As to the flow rate, you can adjust it down if you like but since this is a closed loop where the carbon and GFO have many passes to capture the contaminants, the exact flow rate isn’t a major concern. The flow rate will slow and contact time increases as the cartridge gets clogged with tank debris which makes it kind of self-regulating.
If you don’t have room in your sump you can mount reactor on the wall or inside your cabinet and use longer tubes to submerge the pump and the reactor output.
We do have a couple quick tips on silencing your reactor. Coupled with a Colbat MJ these things run dead silent but you can get some noise from the pump vibrating against the reactor or something else in the tank like the side of the sump or from vibration transfer to the tubes and something they touch.
The easiest one I have found is these food grade silicone mats. just cut a piece and place it between whatever it is vibrating against or even better just wrap the pump with the silicone and zip tie it in place.
For a more flexible install and zero noise transfer you can pick up some half inch ID silicone tubing as well as these 1/2” mur-lok stem adapters. I have been using silicone pretty much anywhere I can these days.
The purpose and content of this video is to provide general information regarding the products and their applications as presented in the video. Aquatic sales solutions, inc. And its officers, directors, employees and agents disclaim all express or implied warranties, in any way, related to the products and their application as presented in this video, make no representation or warranty regarding the products and the application as presented in this video and shall not be liable for any direct or indirect losses or damages of any type, including but not limited to punitive damages, or from personal injury or death resulting from or in any manner related to the video, and the products in and contents of the video. The viewer expressly agrees that aquatic sales solutions, inc. and its officers, directors, employees and agents shall not be liable for any damages or losses related to the products in and content of the video and hereby agrees to hold the foregoing harmless from any such losses or damages.