Bottom price for Piston Type Refrigeration to France Factory

Short Description:

Marine Provision Refrigeration Unit Marine provision refrigeration unit owns the position as fundamental equipment of refrigeration system in galley, adjust temperature inside cabin according to food preservation requirement, it has been widely used in all kinds of cargo ship、passenger ship、nasal vessel and marine oil platform and so on, owning the characters of newly design、convenient operation、running safety、safety and reliability、simple maintenance etc. 1.It consists of compressor、c...


Product Detail

Product Tags

We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Bottom price for Piston Type Refrigeration to France Factory, If you are interested in any of our items, please don't hesitate to contact us and take the first step to build up a successful business relationship.


Marine Provision Refrigeration Unit

Marine provision refrigeration unit owns the position as fundamental equipment of refrigeration system in galley, adjust temperature inside cabin according to food preservation requirement, it has been widely used in all kinds of cargo ship、passenger ship、nasal vessel and marine oil platform and so on, owning the characters of newly design、convenient operation、running safety、safety and reliability、simple maintenance etc.

1.It consists of compressor、condenser、valve plant (expansion valve) and so on.
2.Adopt compressor from international brand.
3.Use main controlling components of imported brand.
4.It adopts HALL77-2 high-efficient heat transfer tube (can choose B10、B30 high-efficient copper nickel tube) with good anti-corrosion character for condenser, applying special structure for avoiding cutoff resulted from swing of ship.
5.It can be used directly after being installed with necessary tubes and connected to electricity.
6.Its design and manufacture are according to standard requirements of ship class.
7.Product in specification can be customized.

  • Previous:
  • Next:



  • .This motor came in and would not even turn over. It had been sitting for an extended period of time, but was to have at least started sometime this season.Diagnostic showed that the solenoid was faulty. Pulled the bad one and replaced, now it would turn over to do a diagnostic. Compression was 155,155 and 160.
    Spark check showed no spark on #1, and fair spark on #2 and #3. DVA to #1 showed 4 volts and it takes at least 150 to fire the coils. Trigger DVA was 4+ x 3 which was within normal limits. Stator DVA was 40+ on the low side and 175+ on the high side which is within normal limits. Readings show a faulty pack. Prepared to change pack but the wiring was slightly rusted, so did some cleaning and fire returned to #1. Redid the DVA and now had right at 230 on all three. Checked fire and it was great on all cylinders. On to the fuel- fuel in the tank was stale and contained water. Drained the tank. Put the motor on our tank and tried to run. It was only running on the #2 cylinder. I was preparing to build the carbs, but decided to do a quick flush since the gas was pretty bad. After flushing carbs it picked up #1 and #3 cylinders. Now it would run on #1, #2 or #3. Water pump seemed to be putting out a pretty healthy stream.

    This was another “I just bought it” so before going to much further it is time for fresh gas in the tank and a lake test. That will at least show that there are no problems with the lower unit gears, clutch and prop.

    Please check with us for your used parts needs, as we part out boats and motors on a daily basis. All of the parts we sell have been used in freshwater only. Please check with your local mechanic to clarify that this is the correct part you need. Most of the parts listed here have many more pictures available upon request.

    If you would like to purchase this or any other part we will put it on our website for immediate purchase through PayPal or credit card. We understand that it’s unconventional to purchase items from youtube, so please note the 100% positive feedback on both of our eBay usernames: shipshapeparts and shipshape8968804.

    All of the parts we sell are represented thoroughly and accurately to the best of our ability. We gladly accept full returns if you feel a part was misrepresented. No returns on electrical components, as they are all tested and working properly when they leave our location.

    Feel free to visit our web site: ShipShapeTN.Com
    Send us an email: ShipShape@Bellsouth.Net or
    Give us a call: 615-459-7202!

    We are Ship Shape Marine
    1323 South Lowry Street
    Smyrna, Tennessee 37167

    Thanks for your interest!

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House